Do you want to get the best possible performance from your computer?
The truth is we all want to get the best possible performance from our computers. So, what do you do when your CPU (central processing unit) starts to overheat? Well, you don’t just give up, do you?
Gigabyte’s new M32U series CPU cooler provides a high-quality solution. It’s designed to deliver maximum performance in a slim profile and is compatible with Intel socket AM4 motherboards.
A great monitor is an essential tool for any serious computer user, and one of the best models we have ever tested is the Gigabyte M32U. This IPS panel boasts a 144Hz refresh rate, local dimming, and a VESA DisplayHDR 400 certification. Read on to learn more about the specs and pricing of the M32U.
The Gigabyte M32U is a high-performance gaming monitor that offers stunning visuals and advanced features. Designed to deliver an immersive gaming and entertainment experience, this monitor combines a 4K UHD resolution, high refresh rate, and HDR support. In this comprehensive review, we will explore the features, performance, and overall suitability of the Gigabyte M32U for gaming enthusiasts and multimedia enthusiasts alike.
Introduction
The Gigabyte M32U is a 32-inch gaming monitor that features a 4K UHD resolution of 3840×2160 pixels. With its high pixel density, the monitor delivers incredibly sharp and detailed visuals, allowing you to fully appreciate the intricacies of your games and multimedia content. The large screen size provides an immersive viewing experience, bringing your games, movies, and videos to life.
You May Also Like Best Monitors For Bright Rooms
- 31.5" SS IPS 3840 x 2160 4K Display Gaming Monitor.Brightness 350 cd/m2 (TYP)
- Viewing Angle (L/R) (CR>=10) is 178°/178°
- 144Hz Refresh Rate, 1ms (GTG) Response Time, Supports Adaptive Sync Technology
- 10-bit color / 90% DCI-P3 / 123% sRGB / VESA DisplayHDR 400
- Connect and control multiple devices with KVM
REASONS TO BUY
✓One of the only 32-inch 4K monitors with a high refresh rate
✓Excellent post-calibration color accuracy
✓Two HDMI 2.1 ports
✓Built-in KVM switch
✓Inexpensive
REASONS TO AVOID
✗Poor HDR performance
✗Subpar stand
✗Bad pre-calibration color accuracy
144Hz refresh rate
If you want a monitor that provides a fluid and connected gaming feel, you may want to consider a 144Hz model. This can reduce input lag and enhance the gaming experience on a console. A 144Hz monitor is also more capable of preserving detail during motion.
The Gigabyte M32U is an excellent monitor for gaming. It supports a variety of resolutions, including 2560 x 1440 (WQHD), 1920 x 1080 (Full HD), and 4k (UHD). In addition to its high-resolution screen, the monitor has a low input lag, which helps to prevent image degradation. Moreover, it is compatible with most Xbox Series X formats and is fully compatible with PS5.
The 144Hz monitor is equipped with a 1ms MPRT response time, and the IPS panel is said to be flicker-free. However, the backlight has KSF phosphors, which introduce colorful fringe into the crosstalk.
This monitor offers a range of picture mode presets. These include Standard, Normal, and Custom. Most of these preset modify the OSD settings. However, our test did not include the Smart OD setting, which is supposed to automatically switch to the best setting when varying refresh rates are applied.
The Gigabyte M32U supports AMD FreeSync variable refresh rate technology. To use the feature, you must have a compatible AMD GPU and enable the ‘G-SYNC Compatible’ option in the ‘Gaming’ section of the OSD.
The M32U is VESA DisplayHDR 400 certified, and its HDR color gamut is not strictly strict. It can be adjusted from an sRGB setting. Also, it supports NVIDIA’s G-SYNC compatible feature, which means it can be used with Xbox and PlayStation games.
In addition to its excellent performance, the Gigabyte M32U has a number of productivity features, such as a built-in keyboard video and mouse switch. Additionally, it has HDMI 2.1 ports.
1ms GTG Response Time
One of the most popular monitor specifications is the 1ms GTG Response Time. A 1ms monitor is a quick, responsive, and smooth experience. It’s perfect for first-person and reflex-based games, and it’s especially useful when gaming in low-light conditions. With a response time as fast as this, you won’t have to worry about image ghosting.
If you’re a gamer, you’re looking for the best possible picture and want a display that reacts to your actions. Monitors with a fast response time help reduce display motion blur and give you a smoother experience. Using a monitor with a high response time is important, but you don’t necessarily need to spend a lot of money to get it. You can find a 1ms monitor with an IPS panel at a good price.
Whether you’re looking for a new monitor or considering upgrading your current one, you may wonder whether a high-end model with a low response time is worth the extra cash. Luckily, the answer is “yes.” Even though response time doesn’t make a huge difference to everyday computer users, it can be a headache for gamers working at higher graphics levels. For example, if you’re a professional competitive gamer, the lower your monitor’s response time is, the better your overall gaming experience will be.
Another thing to consider is that the 1ms monitor is not the only one with a fast response time. The average LCD screen will have a response time of under 10 milliseconds. Some high-end monitors will offer a sub-1ms GtG Response Time, while other manufacturers will use more aggressive pixel overdrive settings to achieve the same effect.
There’s another little-known trick to the 1ms monitor. Manufacturers can also measure the “GtG” (gray to gray) response time, which is the time it takes for a pixel to transition from fully active (white) to inactive (black) and back again.
While a low response time is often considered a sign of quality, a high one could actually cause your eyes to strain. In addition, a low response time can also exclude features such as boosted brightness and blue light filters, making it a less-than-ideal option for gaming. On the other hand, a high response time can make a big difference, such as a smoother running game.
Depending on the manufacturer, response time can be measured in different units, and you can easily check it online. As with any feature, a monitor’s response time can vary by manufacturer, so it’s always wise to shop around for the best value.
You can even go online and perform an EIZO test. Alternatively, you can try the same test on Amazon. But be careful because Amazon’s product titles will often have a response time, even if it’s not a good one. This can be a tricky process. Fortunately, many websites also have response time tests. However, this can be a time-consuming process.
4K Monitor Display
4K resolution is a newer technology in the monitor world. It’s an impressively high resolution that makes text look crisper and easier to read. For the best experience, buy a monitor at least 27 inches. If you’re buying a smaller monitor, consider a display with a 3840 x 2160 pixels resolution. This is more than double the size of Full HD and will greatly improve over 1080p.
There are many things to look for when choosing a monitor. Some features include resolution, color accuracy, contrast ratio, and PPI. However, most consumers don’t need a high-resolution monitor for everyday work. A higher-resolution screen isn’t bad if you plan to use your monitor for gaming. The good news is that there are many 4K monitors to choose from. While most are pricey, you can get a great one for less than $500.
While a 4K monitor can be a good purchase, they’re also expensive. A cheap model doesn’t have much to offer besides a few nits of brightness. You’ll need a decent amount of power to keep up with a 4K@60Hz display. Luckily, a USB-C port is perfect for plugging a monitor into a modern laptop. In addition to charging the device, the connector can also output high-quality video.
If you’re looking for a more affordable 4K monitor, you should consider the Gigabyte M32U. It has all the same gaming features as the Samsung Odyssey Neo G8 S32BG85, but at a lower price. Plus, you won’t have to worry about Mini LED backlighting. Also, the screen is a good-sized rectangle, allowing you to open up two windows side by side without moving the computer.
The top-of-the-line, FlexScan EV3237, uses an IPS panel to produce a better-looking picture. It uses EIZO proprietary technology to minimize color shifts at different angles. The gimmick here is its 5-ms GTG response time.
Another good sign that you’re about to upgrade to a monitor that supports high-definition is the inclusion of a USB-C port. These cables are bundled with many monitors these days, but you can still purchase a separate adapter to plug the cable in. When you’re ready to plug in, make sure to match the HDMI 2.0 cable to the correct port. Otherwise, you’ll find yourself with a black screen.
The LG 43UN700 is a good choice if you’re interested in a good-looking monitor that can handle multiple windows at the same time. It has an OnScreen Control feature and two built-in 10-watt speakers. Additionally, it has a USB-C port, making it a great option for connecting a modern PC to a 4K monitor.
Other features to look for are a decent-sized USB hub, a KVM switch, and a great sound system. The Dell U2723QE is also a solid choice, but if you want a monitor specifically targeted for productivity, the S2722QC may be a better fit.
SS IPS panel
The Gigabyte M32U SS IPS panel monitor has been designed for gamers. This display offers a high resolution, wide viewing angles, and a fast response time. It is also HDR-certified, with an 87% DCI-P3 color gamut.
The HDR10 pipeline provides natural-looking uplift to dark areas of the picture, while the 8-bit + FRC dithering pipeline allows for generous color gamut coverage. Despite this, the M32U does not exhibit the ‘HDR experience’ you’d expect from a high-end gaming monitor.
A few key features distinguish the Gigabyte M32U from the competition. These include a wider range of Picture Mode presets, a low-profile stand base, and a metal backplate.
As far as sRGB coverage goes, the Gigabyte M32U is better than the LG 55UD9FN. However, the ‘HDR experience’ of the LG 55″ isn’t as good as you might think.
On the other hand, the Gigabyte M32U does have better viewing angles, response time, and ergonomics. In fact, the M32U has more HDMI 2.1 ports, which can be useful for Xbox Series S|X users. Moreover, the IPS panel gives a smoother appearance than the 28″ version.
Another key feature is the IPS glow. This warm golden-grey shade blooms out with the angle of your eyes. Interestingly, the hue of this shade appeared to be slightly pinker at the bottom of the screen, while the top of the image was relatively dark.
To test the sRGB quality of the monitor, I ran a series of Lagom tests. This was to see if the monitor would show any visible shifts of color with the movements of the user’s head.
While the tests show that the M32U monitor does have minor color changes, it didn’t produce clear saturation or gamma shifts. Furthermore, the ‘HDR’ color gamut isn’t particularly strict.
VESA DisplayHDR 400 certification
If you’re after a stretched-out version of a budget 1440p monitor, then the Gigabyte M32U is worth considering. It has a low-profile stand and a matte plastic finish. The monitor is VESA DisplayHDR 400 certified. This is the lowest level of HDR certification and does not include gamma enhancement.
Despite its modest size, the Gigabyte M32U boasts a 144Hz refresh rate. It’s compatible with DisplayPort 1.4 and HDMI 2.1. In addition, it has three USB 3.0 ports on the back.
The M32U has a slick metal stand and a matte plastic finish. But its HDR performance isn’t stellar.
While it supports FreeSync, you’ll need to enable Adaptive-Sync in the OSD. Aim Stabilizer Sync uses the monitor’s backlight to synchronize with the display’s refresh rate.
The M32U has a variety of Picture Mode presets. Most of them alter the OSD’s settings. You can also adjust the ‘Super Resolution’ sharpness filter.
The M32U is VESA DisplayHDR 400 certified, the lowest of the HDR certifications. It’s also an sRGB monitor. For a full HDR experience, you’ll want to turn on ‘Use HDR’ in Windows.
There’s a bit of banding in the image on solid backgrounds. But it’s not enough to impede the performance of the display.
While the ‘Dark Enhance’ feature does a decent job of lifting up dark shades, it does little to enhance the hues in light shades. As a result, the display can’t account for complex combinations of shades.
The HDR10 pipeline boosts dark shades, smooths gradients, and increases the range of nuanced shades. However, there’s not much control over the gamma curve.
Unsurprisingly, the HDR M32U’s color gamut is only 87% DCI-P3. But it’s the fact that it supports 10-bit per color channel that’s noteworthy. Unlike gamma enhancement, which artificially raises detail by lightening shades, HDR10’s pipeline gives a natural-looking uplift in darker regions.
Local dimming feature
The Gigabyte M32U monitor is an excellent gaming display but lacks some of the features found in more expensive monitors. A key advantage of this monitor is its ability to display 4k @ 120Hz and take advantage of console gaming.
This is achieved by enabling local dimming, a feature that allows individual screen zones to adjust the backlight. This works in a similar way to SDR, preventing large bands of the screen from being brighter than they should be.
This feature isn’t as effective as it could be, however. While the mirroring of the sRGB colors on the screen did happen, it wasn’t very noticeable. We also didn’t see any clear shifts in the brightness of the texts in Lagom, a game that uses a wide range of shades.
The local dimming feature is a little more effective, but the effects aren’t as dramatic. Some darker backgrounds were dulled as the darker content took up more brightness. Also, the contrast ratio wasn’t as good as it could have been.
The other major feature of the Gigabyte M32U is its IPS panel, which provides superior viewing angles and a more uniform response time. It’s also VESA DisplayHDR 400 certified. That’s not the best certification, but it is a good start.
The monitor also supports FreeSync variable refresh rate technology. The backlight will flicker in sync with the display’s refresh rate.
Another good feature is the built-in keyboard video and mouse switch. There is no need to use an external USB mouse, which makes the M32U more convenient than other monitors. Moreover, the M32U’s input lag is pretty good.
Viewing Angle 178 Degrees
If you are in the market for a new monitor, you are likely looking for a wide viewing angle. IPS panels have become the norm for desktop work and can give you a clear view from almost any angle. They are also more attractive than ever, thanks to advancements in panel technology. IPS displays are also better suited for applications that require high contrast ratios and large amounts of horizontal information. In particular, they provide a superior experience for CAD engineers, graphic designers, and video editors.
IPS panels are capable of displaying a wide range of colors. This is achieved by using electrodes rather than a screen surface. While VA and TN panels are interior to each other in terms of horizontal viewing angles, IPS panels offer an even more comprehensive array of vertical and horizontal viewing angles.
IPS technology also provides wide color gamuts and improved HDR performance. For example, an IPS display can handle HDR content more efficiently than an equivalent VA panel. Also, an IPS display can deliver a more colorful picture than its TFT counterparts, ensuring you get a true-to-life picture.
On the downside, an IPS monitor can have a mediocre viewing angle. Luckily, many display manufacturers will let you adjust the angle of your display to accommodate other elements, such as your keyboard and mouse. You can also opt for a dual-arm monitor, which can be a helpful tool for eye calculation.
While an IPS display may be a bit more expensive than its TN and VA counterparts, it will deliver a more rewarding experience for CAD engineers, graphic designers, and video editors. However, you will need to take care in choosing a panel that has the right characteristics. Some IPS panels are more susceptible to a poor viewing angle than others. As a rule of thumb, you should look for a monitor with a viewing angle of at least 50 degrees.
Fortunately, the technology behind IPS panels has advanced considerably over the past few years. These advancements have made IPS panels more responsive to lighting conditions and provide a wider viewing angle. With the right monitor, you can be sure to get the best possible image quality no matter what you are viewing it on.
The IPS display is also an excellent candidate for a multi-monitor setup. Using an IPS monitor with a second monitor allows you to use your display while focusing on your task and gives you a clear view of the main display simultaneously. Although a dual-monitor setup may seem like a waste of space, a secondary monitor can be a great way to check email and perform other tasks while keeping your eyes on the main panel.
IPS panels can be a little more expensive than their TN and VA counterparts, but the IPS oxomote is worth the extra cost. IPS displays are more attractive than ever for desktop work and gaming.
VESA Wall Mounts
If you are looking to mount your monitor to your wall, you’ll need to choose a wall mount that is VESA compatible. A wall mount is a mounting system designed to enable you to adjust the position of your monitor’s position and the angle at which it is displayed. This allows you to enjoy the ergonomic benefits of using a flat-screen television.
The VESA (Video Electronics Standards Association) has developed the standards for mounting flat panel displays. These standards are intended to provide flexibility in mounting solutions, as well as to help reduce the cost of the mounting process. When buying a new display, you must determine whether it has the appropriate hole patterns for VESA mounts.
There are three primary VESA mount variations. They are the MIS-E, MIS-D, and MIS-F. In addition, there are several variants for smaller screens and monitors. For example, the MIS-F mount is square, while the MIS-E is rectangular.
Choosing the appropriate VESA mount is crucial for achieving an efficient, ergonomically friendly, and durable viewing experience. You will want to pick a VESA mount that is the right size for your screen and the room it will be hung in. As a rule of thumb, you should get a VESA mount at least 8 inches by 8 inches.
The first step in VESA-compatible mounting is removing your monitor’s stand base. Next, use a level to check that the height of your monitor is appropriate for the mounting. Once you have found the proper height, screw your monitor into the VESA-compliant mount. Some VESA-compatible monitors come with their own mounts, while others need to be purchased separately.
Using a VESA mount is an easy and inexpensive way to improve the ergonomics of your computer desk. However, if you’re unsure how to install one, you may want to consult a professional. Whether you opt for a custom mount or a more affordable pre-fabricated kit, a good wall mount is essential for hanging up your favorite big-screen TV.
In addition to VESA, many monitor manufacturers also offer custom interface adapters. These adapters will fit most VESA-compatible monitors and allow you to attach your display to various mounting solutions. Many of these are available at local hardware stores and online.
While most monitors are VESA-compliant, you may still encounter problems if you have a thin, curved, or non-compliant display. Fortunately, the VESA compatibility chart can help you determine whether your display is compatible with a VESA mount. If you are unsure, call the manufacturer or check online.
Whether you are just looking to mount your monitor to your wall or are in the market for a new TV, a VESA wall mount is a smart purchase. This mounting solution offers 360-degree rotation, as well as angle adjustment. It can also support weight loads, making a big difference in your comfort.
Ergonomic Design Monitors
An ergonomic design monitor allows a user to set up the screen in a way that is most comfortable. Ergonomic monitors reduce eye strain, fatigue, and improper posture. They also allow users to adjust their display’s height, tilt, and pivot.
The most common adjustment features are tilting and height. Tilting helps you to achieve an ideal viewing angle. If your monitor doesn’t have the ability to tilt, you may need to purchase a mount or articulated arms. This feature is particularly important if you are tall. Taller users may have trouble with the vertical restriction of a narrow screen.
Swiveling is another adjustment feature. Swiveling can help you save space and create a wraparound effect. However, this feature is more useful in cases where you are able to sit in several different positions. You can use a swiveling screen for multi-monitor setups and avoid having a flat surface on your desk. It is especially helpful if you frequently make chair adjustments.
A monitor with an ergonomic design stand offers the ability to adjust your screen’s height, tilt, and swivel in an easy and simple manner. There is a range of height and tilt settings available in all price ranges. Using a monitor with an ergonomic stand allows you to position the screen properly in any sitting position, reducing the risk of eye strain.
In addition, an ergonomic monitor will include features such as a flicker-free backlight, which helps to eliminate eyestrain. Additionally, an ergonomic monitor will feature a blue light filter that limits exposure to ultraviolet rays.
Several manufacturers have introduced ergonomic designs to their monitors. For example, Dell’s UltraSharp U2412m features an adjustable height, a swivel, and a 90-degree pivot. These features offer excellent ergonomic support, and the price is very reasonable.
For those looking for a premium monitor, the Asus PB278Q offers a large panel with an extreme resolution. The monitor also features a swivel and a 40-degree adjustable tilt. This monitor’s ergonomics are impressive, and it has a quick out-of-box setup.
While the Asus PB278Q is a good monitor for the money, it has one major drawback. The stand is not completely flat, and there is some wobbling when the screen is full. Another downside is that the bezel is not wide enough to accommodate several monitors.
On the other hand, the LG 29UM68-P has a 29-inch form factor and a slim pedestal, which makes it ideal for taller users. But, it lacks the swivel and height adjustment functions other monitors offer.
Choosing an ergonomic monitor will reduce your discomfort and improve your productivity. Some models can accommodate four to five inches of height adjustment, while others provide up to 340 degrees of swivel and tilt. Also, these screens are often designed with a built-in client mount. This feature can simplify the deployment of your computer and other peripherals, making it easier to streamline your desktop.
Frequently Asked Questions
Here are some frequently asked questions about the Gigabyte M32U gaming monitor, along with their answers:
Q: Does the Gigabyte M32U support G-SYNC?
A: No, the M32U does not support NVIDIA G-SYNC. However, it is compatible with AMD FreeSync Premium, ensuring smooth and tear-free gaming for AMD graphics card users.
Q: Does the monitor have built-in speakers?
A: Yes, the Gigabyte M32U includes built-in speakers, providing basic audio output. However, for a more immersive audio experience, it is recommended to use external speakers or headphones.
Q: Can I mount the monitor on a wall or monitor arm?
A: Yes, the M32U is VESA mount compatible, allowing you to mount it on compatible wall mounts or monitor arms for a more customized and space-saving setup.
Q: Does the monitor support picture-by-picture (PBP) or picture-in-picture (PIP) modes?
A: Yes, the Gigabyte M32U supports both picture-by-picture (PBP) and picture-in-picture (PIP) modes, allowing you to display multiple sources simultaneously for increased productivity or multitasking.
Q: Is the monitor suitable for console gaming?
A: Yes, the M32U is suitable for console gaming. With its 4K UHD resolution, high refresh rate, and AMD FreeSync Premium support, it offers a smooth and immersive gaming experience for console gamers.
Q: Can I adjust the color settings of the monitor?
A: Yes, the Gigabyte M32U provides various color settings and presets, allowing you to adjust the color temperature, contrast, and saturation to suit your preferences or content requirements.
Other Gigabyte Monitors
- Gigabyte AORUS FI32Q-X Monitor Review
- Aorus FI32Q X Review
- Gigabyte M32U Review
- Gigabyte AORUS FO48U Review
- Gigabyte M34WQ Review
- Gigabyte AORUS FI32U Review
